情境:大於2TB以上的硬碟,若要使用fdisk做分割partition的動作,可能會出現一些警語或是無法查看相關訊息,因此要使用parted指令來做切割partition(並使用GPT格式)。
step 1) 安裝parted套件
# yum install -y parted
step 2) 切partition,並使用GPT
# parted /dev/sdb
----------------------------------------------------------
GNU Parted 1.8.1
Using /dev/sdb
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) mklabel gpt
Warning: The existing disk label on /dev/sdb will be destroyed and all data on this disk will be lost. Do you want
to continue?
parted: invalid token: gpt
Yes/No? yes
New disk label type? [gpt]? gpt
(parted) mkpart
Partition name? []? primary
File system type? [ext2]? ext3
Start? 0
End? -1
(parted) print
Model: OPNFILER VIRTUAL-DISK (scsi)
Disk /dev/sdb: 5508GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 17.4kB 5508GB 5508GB primay
(parted) quit
Information: Don't forget to update /etc/fstab, if necessary.
----------------------------------------------------------
step 3) 查看是否已使用GPT格式
# fdisk -l
----------------------------------------------------------
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 123 987966 83 Linux
/dev/sda2 124 6203 48837600 82 Linux swap / Solaris
/dev/sda3 6204 12283 48837600 83 Linux
/dev/sda4 12284 60801 389720835 8e Linux LVM
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
WARNING: The size of this disk is 5.5 TB (5508429774848 bytes).
DOS partition table format can not be used on drives for volumes
larger than 2.2 TB (2199023255040 bytes). Use parted(1) and GUID
partition table format (GPT).
Disk /dev/sdb: 5508.4 GB, 5508429774848 bytes
255 heads, 63 sectors/track, 669695 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 267350 2147483647+ ee EFI GPT
----------------------------------------------------------
step 4) 格式化(Format)
# mkfs -t ext3 /dev/sdb1
以上資料參考自:http://blog.yam.com/wesley1981/article/16596463
留言列表